Feeder Machine

How To Choose A Servo Coil Feeder Machine For Power Press? Basically, there are two types of servo coil feeder machines:1, Pneumatic servo feeder machine;2, Mechanical servo feeder machine.If your feeding speed is under 16m/min, then choose pneumatic servo feeder machine.Well, how to choose a pneumatic servo coil feeder machine?We should follow up the specification of the metal coil.1, Width of coil;2, Thickness of coil;After we confirm the feeding speed and metal coils' specification, a suitable automatic servo coil feeder machine will be found.For more details of our machines, please freely contact: sophie@he-machine.com

The reasons for the inaccurate feeding of the high-speed roller feeder are:1. The coil thickness adjustment of roller feeder is not adjusted well, which causes the pinch rollers can not clamp material. The gap of pinch rollers should be adjusted according to the material thickness.2. When the thickness of the material is thick, the pressure spring of the roller feeder is not pressed in time, resulting in insufficient pressure of the feeding roller and slipping, so that the feeding is not accurate.3. The brake device of the high-speed roller feeder has oil stains, resulting in brake failure; Or the brakes are excessively rubbed and the friction is lost. Then needs to be re-polished or replaced with new brake pads.4. There is foreign matter like iron scrap in the gear, which causes the feeding to be inaccurate.5. The roller in the one-way clutch is worn, resulting in inaccurate feeding. It is necessary to replace the new roller. 

There are many reasons for the inaccurate feeding of the air feeder:1. If the pressure of the air source is insufficient or the pressure is too high and the pressure of the air source is not determined, the feeding will be inaccurate. Check whether the air source is stable. Be sure the pressure of the air supply is enough.2. The air feeder's release time is not well adjusted. If the release is too late, the material will have a back-off phenomenon, and the feeding will be inaccurate.3. When the feeding pinch is long or the punching speed is fast, the speed adjusting screw of the air feeder is not adjusted well, which causes the feeding could not keep up with the punching speed.4. The thickness of the feeding material is beyond the capacity of the air feeder. The material is too thick and the cylinder can not drive the feeder.5, if not because of the above reasons, then maybe caused by "O" ring quick-wear part, which needs to be replaced.

What Is The NC Servo Feeder Machine Driven By?HongEr use Yaskawa servo motor to drive nc servo feeder machine.A servomotor is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors.Servomotors are used in applications such as robotics, CNC machinery or automated manufacturing.Servomotors are not a specific class of motor although the term servomotor is often used to refer to a motor suitable for use in a closed-loop control system.   

What Is Servo Feeder Machine?A machine feeder adds chemicals, materials, or ingredients to a machine or equipment during the manufacturing process. These workers work with all different types of materials in the production process. Depending on the type of material being processed or manufactured, employees use different devices to add ingredients and materials to the machinery.Machine feeders work in an industrial factory. They perform different types of tasks to 'feed' or load machines for the manufacturing of products. Machine feeders work with all sorts of chemicals, ingredients, and materials. Sometimes the machines that they feed materials into are called hoppers.There are several specifics of this type of job. Different manufacturers run different types of machines, depending on the type of industry. Some machines require for the feeder to add ingredients and materials into the machine by hand. Some require the use of other methods to load the machine.Some machine feeders are required to load the machines or conveyors with materials and ingredients through machines like a forklift. This is normally required where there are mass amounts of materials, ingredients, and solutions to be added to the machine at one time. Often forklifts are needed when large materials are added to the machine or conveyor.Once the materials have been loaded into the machine, they are responsible for controlling the machine. This type of employment also calls for the running of specific controls that start, stop, and pause the machine so that they can adjust the materials or fix any loading issues with the machine.They are also responsible for the unloading of the finished goods from the machine. These employees may have to load boxes on a forklift and load them onto trucks and conveyor belts. In some instances, they also may be required to use larger machinery to scoop up raw materials to add to the machinery.The machine feeder is also responsible for maintaining and cleaning all machinery and equipment in their work area. The machine feeders are also required to keep accurate manufacturing records of ingredient and material amounts and how much product has been produced.Machine feeders often must measure ingredients, solutions, and materials to add to the machine. This work requires the use of industrial scales, liquid measuring devices, or even ruler measurements. A person must accurately measure each ingredient according to the machine and the product that is being manufactured.What Is The Workplace Of A Machine Feeder Like?The workplace environment is that of a factory or other manufacturing facility. Depending on the facility, the environment may be hot, cold, dusty, or full of chemicals. The machine feeder is constantly working with heavy machinery, so they must be on guard at all times so that safety is maintained.The machine feeder may be exposed to dangerous materials, solutions, and chemicals, so they must use precautions to avoid injuries. While the workplace of a machine feeder can be dangerous, most countries require safety precautions through the use of safety gear. This gear protects the worker from accidents and exposure to harmful materials and chemicals.